Sanipack Pro UP

The Sanipack Pro Up is a macerator pump specifically engineered for use with built-in bathroom units. An extra-slim profile allows the necessary pipework to be concealed, whether being used with back-to-wall or wall-hung sanitary ware.

The Sanipack Pro Up can handle all waste from a WC, a wash basin and shower combined. Waste can be pumped up to five metres vertically, and 100 metres horizontally. This makes it the perfect solution for bathrooms in nearly any situation.

All the features and benefits of Sanipack Pro Up mean it is the ideal choice for a modern, sleek finish in a complete shower room installation.

How the Sanipack Pro Up works

The inside of the Sanipack Pro Up is comprised of a pressure chamber. This starts and stops the unit, and the motor, which drives the stainless steel macerator blades and the pump.

When the flush is activated, the water flowing into the Sanipack Pro Up activates a micro switch in the pressure chamber. This in turn starts the motor.  The motor is sealed for life in an oil filled enclosure.  A common spindle/shaft drives the impeller and the macerator blades. The moving parts therefore are kept to an absolute minimum.  Water and organic waste matter enter the chamber and are reduced to slurry as the macerator blades rotate at 3600 RPM.  The centrifugal force causes the reduced solids to be ejected through a grill into the container where it is picked up by the impeller pump mounted beneath the motor.

Once the water is discharged and the water level in the container goes down, the micro switch deactivates the unit until the flush is activated again.  A normal operating cycle for Sanipack Pro Up takes about 7-9 seconds. This is depending upon the discharge pipe run configuration; power consumption is therefore minimal.

Sanipack Pro Up uses

In addition to the toilet waste, the Sanipack Pro Up will also discharge gray water from a variety of other sanitary fixtures such as: a sink, a shower and a urinal.  When adding a shower, a base will have to be constructed.  This base should be made out of a 2″ x 6″ (minimum) or 2” x 8” (recommended) on edge, to allow for the installation of a P-trap and the required 1/4”per foot gravity flow towards the pump unit.

The wastewater from other sanitary fixtures is discharged into the Sanipack Pro Up via two 1-1/2 inch inlets on either side of the housing.  Either one or both inlets can be used as required.  The discharge elbow on top can be turned either to the left, to the right, or towards the back, depending on the discharge installation.  A non-return valve, which comes already assembled on the discharge elbow, prevents back flow into the unit.

The Sanipack Pro Up is designed to be used with a wall hung toilet.  The depth of the case allows for this pump to be installed within the wall.  Since the reservoir, the macerating pump and the pipes are hidden from view.

Why choose Sanipack Pro Up?

• Extra slim dimensions
• Can connect WC, wash basin, and shower
• Perfect choice for a complete shower room installation
• 5 Year extended warranty
• Save over €105 when you buy online
• Free Nationwide delivery

Available Accessories*

• Saniflo Descaler – For trouble-free maintenance
• Sanialarm – To warn of unusual build-ups

* can be bought separately

The extra slim Sanipack Pro Up gives you a stylish way to add a wash-room shower unit or even a complete en-suite shower room or bathroom in a basement or loft extension. It is also a solution for any home improvement location where conventional large bore pipework would be impractical.

The Sanipack Pro Up along with all of our Saniflo Systems and Kinedo Shower and Bath Solutions can be bought online with the reassurance of dealing with Ireland’s official Saniflo and Kinedo agent.

As well as supplying the superb Saniflo and Kinedo ranges at great prices online in Ireland, we also provide:

• Nationwide Delivery
• Same Day Dispatch
• Free Saniflo Advice
• All products in stock
• Saniflo Installation
• Saniflo Service
• Saniflo Repair